50 Years

Signatone Thermal Probing Systems


Model S-1060 QuikTemp
Controlled with D3 Dark Box

Signatone manufactures Thermal Chucks (hot and cold) for a wide range of applications:

  • Prober mounted or stand-alone Hot Chucks for characterizing wafers and packaged devices at temperatures ranging up to 300°C
  • Very high temperature Hot Chuck Systems for up to 600°C. (see below for data)
  • -15°C to 70°C Stable Temperature Hot/Cold Fluid Chuck Systems for liquid crystal hot spot detection
  • Stand-alone Dark Box Systems for engineering applications
  • C/V plotter Hot Chucks Systems for production and engineering
  • Ultra high temp (600°C) systems
  • Triaxial Hot Chucks for low current probing
  • Large area Hot Chucks for flat panel probing

 

Signatone S-1060R 4" Hot Chuck Data Sheet (600°C)

  • Temperature Range..................Ambient to 600°C
  • Temperature Accuracy..................+/- 1°C
  • Temperature Resolution.........1°C
  • Temperature Uniformity......................+/- 1°C
  • Surface Flatness.................005" TIR across Temp Range
  • Surface/Base Expansion..........Typical 0.010" across Temp Range
  • Surface to Ground Isolation...106 ohms. ( 1014 ohms available with triax top )
  • Surface to Ground Capacitance...................<300pF
  • Electrical Noise Floor....................Approx. 10 nA
  • Chuck Actual Diameter........................4.5"
  • Chuck Height Q chuck......................1.25"
Controller Information Model 1060R
Power Width Height Depth
110V/20A
19" (483 mm)
7" (178 mm)
20" (508 mm)
220V/10A
19" (483 mm)
7" (178 mm)
20" (508 mm)

Note: This system mounts in a standard 19" rack.


600 C S-1060 4" Chuck

Note: Cooling from 600°C to 350°C is by gas, from 350°C to ambient by liquid.

LucasSignatone Corporation, Manufacturers & Producers, Gilroy, CA