Signatone SP-100 High-Precision In-Line Micropositioner
Signatone offers an extensive line of Micropositioners to address virtually every probing and measurement
Features / Applications
application, ranging from the very simple to the highly complex sub-micron high-resolution positioners.
The SP-100 High Precision In-line Micropositioner
accommodates all of Signatone’s Probe arms and single needle probes allowing for a variety of test configurations. Available with vacuum or switchable magnetic base, pivot or slide head, micrometer driven 3-Axis linear motion, this positioner has quickly become the probing industry’s standard.
Designed for a Variety of Probing Applications
- Device Characterization and Modeling
- Failure Analysis
- Ultra-low Noise Measurements
- High Power Test
- Resistivity Measurements
- MEMS Test
- Your Application
| Model SP-100 | |
|---|---|
| Travel range | 12.5 mm X-Y-Z |
| Feature resolution | 1 μm |
| Screw resolution | 100 TPI |
| Mounting | Vacuum, Magnetic |
| Footprint (W/D) | 76mm x 40mm |
| Application |
|---|
| High-precision and high-resolution probing |
| High-performance CV/IV probing Failure analysis |
| Resistivity -Duel Kelvin 4-point probing |
| Internal node probing |
| High-power probing |
Specifications
Precision Linear
Bearings
Base Mounted
Micrometers
Awesome
Logo
Vacuum Release
and Connection
Cable Strain
Relief
“Z” Lift
Probe Mount
Interface Plate
- DIMENSIONS – Pivot, Dual Pivot and Slider Head Configurations
Sp-100
25mm - 100mm*
Mount Plate
ob
Pivot Knob
Swivel
Pivot
Probe Arm Mount
Dual Pivot
Slide Plate
Course “Z” Adjust
Signatone ProBe HolDer Series
Offering a wide variety of probe holders to suit virtually every probing requirement.
This Signatone selection guide is for our standard and coax isolated probe holders designed for use with all Signatone Micropositioners
The Signatone “U” Series probe tip holder comes in one universal length of 4.75”. This holder is made to be bent or cut to length by the customer. The “U” style holder is available in the following Signatone “Tip-Mount” Options
0.087” / 2.21mm dia.
US-Style Probe Holder
US
UP-Style Probe Holder
UP
Probe Tip
S – Screw Lock Probe Mount
Probe Arm Shaft
P – Spring Clip
Spring
“S” Style
“Screw Mount”
“P” Style
“Spring Clip”
The Signatone “S” or screw locking option probe tip mount secures the probe tip with a set screw allows for easy and quick probe replacement.
The Signatone “P” or Spring Clip option probe
tip mount allows for a quick and easy probe
change without the need for any tools.
| PART # | Material | Length | Probe Mount | Connection | Typical Use |
|---|---|---|---|---|---|
| US | Brass | 120mm | Screw- Lock | Mini-banana jack | > 1µA |
| UP | Brass | 120mm | Spring- Clip | Mini-banana jack | > 1µA |
Dc Probe –Selection Guide
| Coax Probe (C) | Triax Probe (T) | Kelvin Probe (K) | |
|---|---|---|---|
| Max voltage | 500 V | 500 V | 500 V |
| Temperature range | -60 °C to 300 °C | -60 °C to 300 °C | -60 °C to 300 °C |
| Leakage current | < 50fA | < 20fA | < 20fA |
| Connectivity | BNC | Standard Triax | SSMC |
| Connectivity type | Single Coaxial | Single low noise Triaxial | Force/Sense Coax |
| Characteristics impedance | 50 Ohms | 50 Ohms | 50 Ohms |
| Residual capacitance | < 80fF | < 80fF | < 80fF |
| Probe holder material | Brass | Brass | Brass |
| Probe tips material | Tungsten | Tungsten | Tungsten |
| Probe tips sizes | 0.5 µm – 25 µm | 0.5 µm – 25 µm | 0.5 µm – 25 µm |
| Minimum pad size | 25 µm x 25 µm | 25 µm x 25 µm | 25 µm x 25 µm |
Coax Probe
Triax Probe
Coax Kelvin Probe
- High Voltage/High Current PROBE –SELECTION GUIDE
| High Voltage Probes | High Current Probe | |||
|---|---|---|---|---|
| Model | HVP-CX-3 | HVP-TX-3 | HVP-CX-10 | HCP 100 |
| Max Voltage | 3 kV | 3 kV | 10 kV | 500 V |
| Max Current | 1 A DC/30 A Pulsed | 120 mA DC | 20 mA DC | 10 A DC/100 A Pulsed |
| Temperature Range | -60˚C to 300˚C | -60˚C to 300˚C | -60˚C to 300˚C | -60˚C to 300˚C |
| Leakage Current | < 200 pA @ 3 kV, < 5 pA @ 10 V | < 1 pA @ 3 kV, < 100 fA @ 10 V | < 100 pA @ 10 kV | N/A |
| Connector Type | SHV | HV Triax | UHV Coax | HV Banana |
| Replaceable Tip | Yes | Yes | Yes | Yes |
| Probe Material | W | W | W | BeCu or W |
Hvp-Cx-3
Hvp-Tx-3
Hvp-Cx-10
Hcp-100
Signatone ProBe Tips
Offering a wide variety of passive probe tips to suit virtually every probing requirement.
This selection guide is our standard offering / special sizes and materials available.
| Model Number | Material | TIP Diameter | Shank Diameter | Length |
|---|---|---|---|---|
| SE-10T | Tungsten | 1 µm | 0.254mm | 31.75mm |
| SE-10TZ | Tungsten | 1 µm | 0.254mm | 31.75mm |
| SE-20BC | Beryllium Copper | 12 µm | 0.51mm | 31.75mm |
| SE-20T | Tungsten | 3.5 µm | 0.51mm | 31.75mm |
| SE-20TB | Tungsten | 20 µm | 0.51mm | 31.75mm |
| SE-20TBL | Tungsten | 20 µm | 0.51mm | 50.1mm |
| SE-20TZ | Tungsten | 3.5 µm | 0.51mm | 31.75mm |
| SE-O | Osmium | 12 µm | 0.63mm | 19mm |
| SE-P | Palladium | 12 µm | 0.63mm | 19mm |
| SE-S | Steel | 12 µm | 0.63mm | 28.45mm |
| SE-SM | Tungsten | 1 µm | 0.51mm | 50.1mm |
| SE-SMS | Tungsten | 0.2 µm | 0.51mm | 50.1mm |
| SE-T | Tungsten | 5 µm | 0.63mm | 31.75mm |
| SE-TB | Tungsten | 25 µm | 0.63mm | 31.75mm |
| SE-TC | Tungsten Carbide | 12 µm | 0.63mm | 31.75mm |
| SE-TG | Gold Plated Tungsten | 12 µm | 0.63mm | 31.75mm |
| SE-TL | Tungsten | 5 µm | 0.63mm | 50.1mm |
| SE-TZ | Tungsten | 5 µm | 0.63mm | 31.75mm |
| SM-10 | Tungsten | 0.2 µm | 0.51mm | 30.5mm |
| SM-35 | Tungsten | 0.7 µm | 0.51mm | 30.5mm |
Probes with tungsten shank can be cut and bent to a particular shape by the end user.
Z bend models are also available, for more information, contact sales@signatone.com
Packaging: Tips are sold by the box including quantity of 5 tips.
Discounts available on quantity purchases of 20-100 box, +100 boxes.
(contact factory for details)
Quantity of 5 Tips in ea. box
Warranty
- Standard Warranty 12 months *
For Extended Warranty and Service Contracts contact Signatone Corp. for more information
- North America: Sales.NA@signatone.com
- Europe: Sales.Europe@signatone.com
- Asia: Sales.Asia@signatone.com
* See Signatone Corporate Terms and Conditions of Sale for further details.
Request a quote
Configure this system with our engineers — factory‑direct from Gilroy, California.